Plumbing can be very intimidating to someone that has never done it before. It can easily lead to a bit of information overload because of all of the resources available to new plumbers. Below are some tips to assist you in getting all of this information organized to where you can start plumbing correctly.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.
Use your garbage disposal with the cold water running so that you can preserve the blades of the disposal. Using hot water makes grease more liquid and can cause problems, including clogs. Make sure to clean blades by putting in a little dish detergent and run cold water at the same time.
Do not overload your garbage disposal. If you need to dispose of large items, cut them up into smaller pieces. Also, do not put too much in at a time, put one or two items in and wait a few seconds to dispose of the rest. Overloading your disposal can cause the engine to overheat.
Make sure to pour a gallon or two of water into drains that are used infrequently. Not only does this make sure that they are clear when you need them, but can also fill the trap and make sure that unpleasant odors don’t enter your home. Doing this periodically will also help you to catch problems before they become serious.
Fix issues related to low water pressure that are a result of a buildup of sediment by cleansing the aerator. Get rid of the aerator, remove it, and clean it with a brush dipped in some vinegar. Rinse and reassemble the aerator, then reattach it to your faucet. Remove the sediment from the aerator to increase water pressure.
Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.
Hopefully, these tips have provided you with some very valuable information, as well as given you a way to organize all of the thoughts and information you may have already had on plumbing. Keeping these tips in mind when you start plumbing can help you to become a very good plumber.