If plumbing is something that you find difficult or intimidating, you are not alone. Many people can’t solve their own plumbing problems, which means that plumbers can charge a lot of money for even simple and quick repairs. Don’t let this happen to you, read on to learn how to solve your own plumbing problems!
Find a plumber that you can trust. Make sure to get referrals from friends and family so that you can prevent getting ripped off, which happens often. Also make sure not to pay the plumber before the work is completed. If you do that, there will not be an incentive to get the job completed in a timely manner.
If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are less likely to freeze.
If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes.
Use your garbage disposal with the cold water running so that you can preserve the blades of the disposal. Using hot water makes grease more liquid and can cause problems, including clogs. Make sure to clean blades by putting in a little dish detergent and run cold water at the same time.
Check your faucets for leaks. Check the knobs and the faucet itself. Hundreds of gallons of water a day can be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you can save yourself a lot of money. Leaks can grow over time as well, so avoid a disaster and check all faucets for leaks!
Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.
Clean the aerator to fix low water pressure issues that are caused by the buildup of sediment. Get rid of the aerator, remove it, and clean it with a brush dipped in some vinegar. Rinse the aerator with water, put it back together and then attach it back onto the faucet. Doing so will assist in increasing water pressure since obstructions in the aerator are removed in this process.
As you can see, many plumbing problems are very easy to solve on your own if you have the proper knowledge. Don’t let a professional plumbing service charge you a hand full for something that you can do on your own! Try the tips in this article next time and see the money you save!