If you’ve ever hired a professional plumber for something simple, you know how expensive and annoying the experience can be. If you’d like to save a little cash by learning how to solve your own plumbing problems, read on. This article will give you the knowledge you need for your own plumbing repair.
Find a plumber that you can trust. Make sure to get referrals from friends and family so that you can prevent getting ripped off, which happens often. Also make sure not to pay the plumber before the work is completed. If you do that, there will not be an incentive to get the job completed in a timely manner.
On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.
Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.
Do not put cooking oils, fat, or grease, down your drain. These fats cause clogs by solidifying in pipes. To properly dispose of fats, put them in a bowl with a lid that you can dispose of. Once it gets hard, throw it in the trash or compost bin.
Never pay a plumber until the job is complete. Some plumbers may require a deposit, but don’t fork over all the dough until the job is completed to spec. You want to make sure that the plumber completed everything that they said they would before they get your money.
If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
Find out the plumbing codes in your local area before starting any project. Plumbing codes can vary wildly from area to area and you don’t want to run afoul of the codes. Visit your local building department to find out information or hire a plumber for a day to help you go over your plans and provide advice.
As you can see, hiring a professional plumber is usually an unnecessary and expensive thing to do, compared to fixing the problem yourself. Next time your plumbing needs repair, try pulling up this article and trying to solve it yourself. You may be surprised how easy it is to do!