Category Archives: Plumbing

Mastering The Plunger And More – Ideas To Tackle Your Plumbing Emergencies

Published by:

If you are first learning about plumbing, it can be a little overwhelming. Though like everything else, if you do a little research, learning, and take a lesson or two, you can pick it up fairly easily. The following tips will give you the foundation you need to successfully resolve your plumbing problems.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.

Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.

To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.

Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. The tip of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.

If you want to keep your kitchen drains from clogging up, don’t pour grease down them. As it cools and congeals it can trap other food or waste particles, which over time can slow the draining of water and even form a clog that will not be easy to remove.

If you are trying to decide on the material to use for your hose, stick with stainless steel. Stainless steel has a very solid construction and stays durable for many years, eliminating the need for replacement. Also, this material is less prone to bursting, which can yield severe plumbing issues.

Not as difficult as you thought, was it? Plumbing has many different easy tips and tricks that anyone can learn. Sometimes you just have to figure out where to start to so that you have the ability to jump right in. Now you can start putting these tips to use on all your household plumbing needs.

Excellent Advice To Help You Remedy Your Plumbing Problems

Published by:

When it comes to plumbing, you want to make sure that you are getting the best advice available. Use the tips and tricks provided in this article to ensure that you are getting reliable information to use at home and it will not lead to further, unwanted costs down the road.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are less likely to freeze.

Check your faucets for leaks. Check the knobs and the faucet itself. Hundreds of gallons of water a day can be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you can save yourself a lot of money. Leaks can grow over time as well, so avoid a disaster and check all faucets for leaks!

You should regularly check for water damage to your bathroom floor caused by your toilet in order to save money and further complications. Feel the floor around the toilet and check to see if the floor is soft, molded, chipping, etc. Straddle the toilet and rock from one foot to the other to see if you feel any weakening or “softness” in the floor beneath you. By noticing a problem early on, you can save yourself a bunch of money if you were to leave it alone.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

Don’t skimp on quality when it’s time to replace that shower head. People often times incorrectly believe that it’s alright to buy a cheap shower head. Like many cheap products, however, cheap shower heads are often not durable.

Keep your dryer’s lint trap clean. This is a good idea for a variety of reasons, not the least of which is fire safety. Be sure to check the trap for tears and rips, because this can cause bigger problems as it may mean that lint is escaping into your pipes.

In conclusion, it is important that you back yourself up with a great base knowledge of plumbing. Ideally, you were able to find this article both informative and interesting. Use this great information and you will find that you will save a lot of money, as opposed to having to hire a professional.

Get The Plumbing Advice To Help You

Published by:

Were you aware that you could get something as cheap and easy to install as a rubber blanket for your pipes in order to take care of that banging noise you hear in your house? Use this article for this and more great plumbing tips to help you today!

If your pipes are so noisy that they sound like squeaking or hammering, you can easily solve this problem. If pipes are exposed, you must anchor them. Pipes that are contained within the floors, walls and ceilings may need to be attended by a professional plumber.

As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.

To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.

Do not forget to check the temperature of the water heater in your house, especially if you are planning to leave for an extended period of time. You should keep the temperature no higher than 120 degrees, which will help to reduce energy use and prevent your system from burning out.

Cover pipes that are outside or in cool areas. Use heat tape to make sure that the pipes are completely covered and insulated. This will prevent frozen pipes in the winter, which can be an expensive problem. Check outdoor pipes for other problems such as leaks and cracks which are better to catch early.

In conclusion, there is a lot that you can easily do in your own home when it comes to dealing with plumbing issues. Hopefully you learned a few things and will be able to act on them. Use this advice today and be confident in all of the plumbing work that you do.

Easy Tips To Cure Your Plumbing Woes

Published by:

Most people are unaware that plumbing is something that just about anybody can do. It can be a daunting idea at first, but after you learn the basics, it can actually be pretty easy. Use this article as a guide to help you with any plumbing issues that might come up.

You don’t want to end up with frozen pipes, so take preventive action, such as wrapping outside pipes with insulation, and keeping indoor temperatures above freezing at all times. If ambient temperature surrounding pipes goes below freezing, pipes can freeze as well. In the best case scenario, you will have to wait until they thaw so that the water runs again. However, frozen pipes commonly break or crack pipes, leading to flooding and costly repairs.

Do not put cooking oils, fat, or grease, down your drain. These fats cause clogs by solidifying in pipes. To properly dispose of fats, put them in a bowl with a lid that you can dispose of. Once it gets hard, throw it in the trash or compost bin.

Knowing what tools are what and the proper way to use them will make you much better at plumbing. Use as many resources as you need, such as online or the library, to find the right information to repair your plumbing issues. Plan properly prior to beginning any type of repair, because fixing a mistake can cost a lot of money.

Don’t use any colored tablets that claim to be cleaners in your toilet. Either kind of toilet tablet might break down obnoxious smells in your toilet, but they might also break down the rubber parts, resulting in malfunction.

If your sink is letting rusty water out and it will not drain, it is mostly likely because of the biological scum and grease that is built up in the pipes. You need to have your drains professionally cleaned, allowing maximum flow through your drains. Your drains must be open completely.

If your house uses well water and you start to see orange or pink stains in your tub and other water fixtures, you have too much iron in your water. To get rid of this problem, you can either use a commercial product to soften the water, or have a contractor come to your home and do the work for you.

It is not always necessary to call in a plumber when you have a damaged section of pipe in your plumbing. There are repair kits you can buy in your local hardware store which are excellent in repairing leaks. If you have a small leak, you can rub a compound stick over the hole or crack in the pipe to seal it shut. Epoxy paste is also an excellent remedy for a leaking pipes. Make sure you turn off the water and completely dry the pipe before applying the epoxy.

In conclusion, you do not want to find yourself stuck paying for a large bill given to you by your local plumber when it was a task that you could have easily taken care of yourself. Use this article in order to establish a firm base knowledge of plumbing and what you can do.

Plumbing Tips That Can Save You A Bundle

Published by:

If plumbing is something that can have you stumped, you probably know how expensive it is to have it done professionally. You also may have to wait for a plumber to arrive when there’s a problem happening now! Don’t let this happen, read on for tips on solving your own plumbing problems!

Use your garbage disposal with the cold water running so that you can preserve the blades of the disposal. Using hot water makes grease more liquid and can cause problems, including clogs. Make sure to clean blades by putting in a little dish detergent and run cold water at the same time.

If you have a clogged drain, don’t use cleaning chemicals to try to clear the clog. These harsh chemicals can corrode your metal pipes leading to leaks and broken pipes over time. Instead, stick to a plunger or make use of a plumbing snake to clear them.

Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.

Taking preemptive action to fix a strange smelling kitchen sink can be a good way to keep your kitchen smelling great. Make sure not to throw hair or grease into your sink. Use baking soda if you have a strange smell coming from your drain. Make sure you use your garbage disposal if you have one to grind up any food and use water while doing this to prevent damage to the blades of the garbage disposal.

In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.

If you are using a slower head, see to it that you replace it with one that has good quality. Some people think that one shower head is like any other, so decide on price alone. Inexpensive shower heads are not terribly sturdy, though, and may not hold up to daily use.

Cleaning an aerator can remove sediment buildup that causes low water pressure. First, you should remove and disassemble the aerator. Next, clean it with a brush that has been dipped in white vinegar. Finally, rinse off the aerator, put it back together and then reattach it to your faucet. This should raise the water pressure nicely because anything that was inside of the aerator will be removed.

As you can see, there’s no reason to pay so much just to wait for a plumber to come and fix a problem that you could be working on yourself. Applying the tips in this article can save you time and money next time your plumbing needs to be repaired.

Helpful Advice For All Kinds of Plumbing Projects

Published by:

Plumbing can cost a lot of money, so being prepared and knowing how to take care of your plumbing can be very beneficial to you and your wallet. By knowing how to take care of your plumbing, you can save time and save yourself a lot of money, in the end.

Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.

Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.

If your water pipe freezes, switch on the nearest faucet tap to that pipe so that water can exit when the pipe thaws. This can relieve the pipe pressure that could cause bursting and further home damage.

Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.

Your plumbing experience can go a lot smoother when you know your tools, as well as how to handle them properly. Read every manual, and use the Internet and library to research the projects that you plan on doing. Before attempting any repairs, plan ahead, or you may make a costly mistake.

Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

Use lots of cold water when you run your garbage disposal. The cold water helps the blades that are inside stay sharp, and will keep your disposal running smoothly. If you use hot water, any grease in the disposal will liquefy, causing it to accumulate further down the drain, which could cause clogs.

By knowing your plumbing and how it works, as was stated before, can save you a lot of time and money. There’s nothing worse than a plumbing accident to mess up your day. So, using the advice from this article, you can be sure to save yourself a big headache!

Problems With Your Pipes? Plumbing Tips That You Can Use

Published by:

Plumbing needs to be done right! It can create more trouble and expense if it is not done properly! Not everyone is a plumber. If you are not up to the job, hire it out! If you can do-it-yourself, that is great! You will need the right tools and know how. Read this article for some handy tips and tricks!

As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.

Your septic tank should be pumped out at least once every five years if you want it to stay in optimum working order. This will keep sediment from hanging out in your tank and eventually causing there to be a backup in your home. Getting your septic tank drained occasionally may be expensive, but it’s dirt cheap compared to the cost of repairing a damaged septic system or the cleanup cost when raw sewage backs up into your home.

If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes.

It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.

If your toilet is slow to flush, add some white vinegar to the overflow tube. White vinegar helps the water from your tank to flow quickly, which will make the toilet flush faster. It is recommended that you use about a quart of the vinegar and let it stay there for at least an hour before flushing.

Use strainers in all drains to catch hair and other objects. This will prevent all the material from going down the drain and causing a clog, which can cause a bigger problem down the line. Clean out the strainers daily so that you don’t start getting backup of water in your sink or tub.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

Hopefully, you have found the tips and tricks above to be quite handy! Whether you hire out the job or do-it-yourself, take the necessary time to do it right. It can create more trouble and expense in the future, if it is not done properly!

Plumbing Tips You Can Do By Yourself

Published by:

Doing your own plumbing repairs can have many benefits. You can save money by not having to call a plumber and pay for their labor. You can also gain a sense of accomplishment by learning new skills and completing tasks yourself.In this article you will find a few ideas that you could find to be very handy.

Roots from a tree in your back yard can be a real headache when it comes to plumbing. Make sure if you have a big tree or bush or some kind of plant with a big root system, that you ask your plumbing company about root killing agents. You can flush these down your toilet and kill any roots that may be blocking your pipes and save yourself a lot of money by stopping a back up before it happens.

Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.

In order to avoid unsightly and unnecessary clogs in your shower, invest in a drain strainer. This cost-effective addition to your shower will gather your hair before it makes it to the drain, and limit the chances that you will find yourself showering while standing in a clogged up mess.

Making sure you know all of your problems so you can have them fixed by one plumber visit is very beneficial. Having them all fixed in one visit takes a lot of money off of your bill because you don’t have to pay for the visit multiple times so make sure you make a list first.

Do not overload your garbage disposal. If you need to dispose of large items, cut them up into smaller pieces. Also, do not put too much in at a time, put one or two items in and wait a few seconds to dispose of the rest. Overloading your disposal can cause the engine to overheat.

If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.

To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.

There is no doubt that many of the common maintenance and repair jobs that need doing on your plumbing are things that you are well capable of. You just need to adopt a cautious and methodical approach. Don’t rush anything or take chances and you’ll be fine. And, if you’re a husband, you can score major brownie points with your wife!

Find Useful Plumbing Tips And Tricks To Use

Published by:

When it comes to plumbing, you want to make sure that you are getting the best advice available. Use the tips and tricks provided in this article to ensure that you are getting reliable information to use at home and it will not lead to further, unwanted costs down the road.

To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.

Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet’s tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

Check floors around toilets for softness, so you can tell if you have any floor damage. Sit on your toilet and sway across both feet to feel if there are any spots less firm than the others. You can save money by noticing and treating this problem as early as possible.

Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.

In conclusion, it is important that you back yourself up with a great base knowledge of plumbing. Ideally, you were able to find this article both informative and interesting. Use this great information and you will find that you will save a lot of money, as opposed to having to hire a professional.

Clogged Drains Got You Down? Get Help With All Your Plumbing Needs Here!

Published by:

Plumbing can really get you in a bad situation. It is your responsibility to make sure that you know at least the basics to ensure that you do not lose valuable property and end up costing yourself much more money. Use this article for the best plumbing advice.

As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.

Roots from a tree in your back yard can be a real headache when it comes to plumbing. Make sure if you have a big tree or bush or some kind of plant with a big root system, that you ask your plumbing company about root killing agents. You can flush these down your toilet and kill any roots that may be blocking your pipes and save yourself a lot of money by stopping a back up before it happens.

If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.

Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.

Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

If water is not coming to the dishwasher, you most likely have a blockage somewhere. You will need to turn off the water supply and remove the hose that leads to the dishwasher. After securing the hose, turn the water back on. See if it feeds into a bowl. If not, then you must find the block where it is at which may include removing more piping.

In conclusion, you want to back yourself up as much as you can when it comes to taking care of plumbing issues. Use the details in this article to make sure that you know all of the ins and outs so that you can hopefully avoid having somebody else come out to take care of your issues.